Home / Roofing Manufacturers / Sika Sarnafil Commercial Roofing
Sika Sarnafil Commercial Roofing in Chandler, AZ
Sika Sarnafil PVC roof repair in Chandler, AZ: we identify Sarnafil or Sikaplan membrane, prep aged sheet correctly and weld in repairs and curb flashing that last.
Sika Sarnafil PVC roofs are common on medical buildings and other facilities where long service life matters. Before we design any repair, we confirm which Sika membrane is on the roof. We review product records and past repairs, then identify the exact sheet the new material will weld to. The proposal lists the prep work, any HVAC or curb changes and the PVC repair in the order they need to happen.
For buildings in the Banner Ocotillo area, we confirm the property and roof section with the building contact. We find any installation records and the exact repair location, then check the existing sheet and what is underneath it. The repair detail is based on those findings. A manufacturer name should lead to a specific product decision and repair scope, not replace an inspection of the roof.
Sarnafil or Sikaplan?
Sika makes Sarnafil and Sikaplan PVC membranes, both with hot-air-welded seams and flashing. We identify which one is on your building and check any old patches near the planned repair. The repair products and prep follow that membrane, and the crew has the right detail in hand before starting.
If you are comparing a Duro-Last PVC replacement, that gets its own proposal, with the insulation, existing material and details for that option. Repairing your existing Sika roof is a different decision from replacing it. Both are PVC, but that does not settle every accessory question between the two.
If we cannot identify the sheet, we find out through documents or a closer look at the material. We note any uncertainty that affects the repair area. The owner knows which product is confirmed and what is still being checked, and we do not promise a permanent weld to an unknown patch.
Seam prep versus surface cleaning
Sika treats seam prep and cleaning the whole roof surface as two different tasks. Its bulletin says new seams do not routinely need cleaner before hot-air welding, and loose dust can be wiped off with a dry cloth. If the overlap is contaminated, Cleaner 100 may be used, and the area has to be wiped dry before welding.
When Cleaner 100 is used to clean an existing roof surface, Sika calls for a water rinse afterward. Its repair directions also name the product for preparing aged sheet and for additions at curbs or pipes. We keep that work separate from prepping a new seam, and the crew knows which instruction applies to each surface.
Our PVC roofing repairs keep those steps clear. We find any contaminated material and the exact repair location, and check the condition of the surrounding sheet before deciding how big the repair needs to be. A general cleaning line item does not cover the prep a specific weld needs.
The prep method is recorded with the repair location. Other areas of the roof may need different cleaning.
Existing sheet and backing
We check the membrane around the damage, find old repairs and look for material that is too worn to weld to. If the insulation or deck under the repair matters, we check it. When something needs to come out or be tested, we say so. The facility manager knows what is under the permanent repair.
A commercial roof repair scope keeps those steps separate. We record what we find at each location. If removing material reveals another problem, we explain the fix and update the scope before the area is covered, so any change in quantity has a clear reason.
For any building, from a downtown office to a medical campus, we confirm the specific roof with the building contact and review product and construction records. The Sika repair recommendation identifies the existing membrane and any backing repairs, and the repair is tied to what we found.
Curbs and pipes
We measure each curb or pipe group in the work area and check the existing flashing, the surrounding sheet and the curb itself. The new detail fits the curb after any repairs are made. Permanent PVC flashing should never cover a loose curb or support.
If you want to compare Carlisle or another replacement system, we write up its underlying work and details separately from the prep on your existing Sika roof. The facility manager can see the actual material and work differences before choosing.
We coordinate equipment changes with the HVAC contractor and confirm the final curb size before flashing. Changed locations are recorded with the affected detail. If a curb is different from the original plan, we update our detail instead of building to the old dimensions.
Scheduling and records
We plan the job around the material and curb work it needs. The building contact confirms access, delivery and any rules for working near sensitive equipment. The crew has the membrane details and repair locations on hand, and the facility manager knows what comes first and what finishes the job.
For Banner Ocotillo area buildings, near where Alma School Road meets Loop 202 Santan Freeway, we confirm the specific roof before scheduling. The building contact provides the property information and work rules, and we combine those with what we find on the roof.
Our rooftop curb and equipment coordination tracks who is fixing each curb and when it will be ready. We keep updated curb dimensions with the roofing crew. The permanent flashing goes on once the materials and the finished curb are both ready.
When we finish, we record the sheet and accessories installed at each location, with photos of the prep and any exposed backing. Curb changes and other recommendations are listed separately. The next repair crew can identify the Sika product, our earlier repair and the condition of the surrounding roof, and the roof section label stays with those records.
Commercial Roofing Questions
What do you check first on a Sika roof repair?
Whether it is Sarnafil or Sikaplan, and which product. We also check old patches and the existing sheet before choosing the prep and repair materials.
Does Sika require cleaner on every new seam?
No. Sika's guidance says new seams usually just need dust wiped off with a dry cloth. Cleaner 100 is used if the overlap is contaminated, then wiped dry.
How is cleaning the whole roof different from seam prep?
Sika calls for a water rinse after using Cleaner 100 on the overall roof surface. Seam prep is a separate step where the area is wiped dry before welding.
Why confirm curb dimensions before Sika flashing?
The flashing has to fit the final curb. We wait for any curb repairs or changes and use the final dimensions before welding the detail.
What records do we get after a Sika repair?
The sheet and accessories installed at each location, photos of prep work, any backing repairs and changed curb details for future reference.
Get your Sika roof repaired
Contact us with your Chandler building and any roof records. We will confirm the Sika membrane, prep it the right way and weld in repairs and flashing that hold up.
Request a Roof AssessmentAll Roofing Manufacturers
