Home / Roofing Manufacturers / SOPREMA Commercial Roofing
SOPREMA Commercial Roofing in Chandler, AZ
SOPREMA roofing in Chandler, AZ: ALSAN liquid flashing with fleece reinforcement for pipes, corners and curbs, plus modified bitumen and PVC options matched to your roof.
On many retail roofs, the trouble spots are the details: pipe clusters, odd corners and curbs that are hard to flash with sheet goods. SOPREMA's liquid flashing system is built for exactly those spots. Planning starts with the existing roof and the detail that needs work. We look at earlier repairs where they meet that detail, then choose materials that suit the actual construction. The facility manager sees how each curb or penetration will be fixed, not just a brand name on a quote.
On any building, from a civic office downtown to a strip center, we start with the specific detail and any roof records available. We inspect the connection and what is around it, and the building contact tells us the site rules for that work. The proposal names the SOPREMA product and explains the prep, reinforcement and any curb or pipe repairs needed first. Those steps are listed with the detail before the quantity is final.
Choosing the product
We identify the material best suited to the detail. SOPREMA offers SBS modified bitumen, liquid-applied materials and PVC, and each is a different choice. The recommendation names the product and what it is doing at that spot, along with the detail reference. The owner gets more than a brand allowance.
If you are weighing Johns Manville or another manufacturer, we compare complete scopes instead of assuming two brands mean the same work. We note the existing material that stays next to each detail. If we cannot identify a product yet, we check before choosing. The facility manager can see why a material was picked, and the prep and curb work stay visible if a different product is considered.
Liquid flashing resin
ALSAN FLASHING is a polyurethane bituminous resin for liquid-applied flashing and detail work. Before choosing it, we look at the actual detail: the existing roofing, the curb or pipe and any earlier repairs. We identify the prep the product instructions require. Liquid flashing still needs a sound surface to bond to, and the proposal explains that surface instead of treating the resin as the whole repair.
A modified bitumen roofing detail can combine SBS sheets with liquid flashing at the tricky spots. We confirm the products at each transition and show where the resin work starts and stops. Tear-off and prep are listed with the installation, so the manager understands what stays and what gets fixed. If the detail changes during inspection, we update the quantity before the final proposal.
Fleece reinforcement
ALSAN FLASHING is reinforced with Polyfleece or ALSAN Pre-Cut Fleece. The reinforcement is part of the flashing, so we name which one is being used and where. We check it against the detail and the product instructions. A resin quantity without the reinforcement is only half the picture, and both appear in the scope.
ALSAN Pre-Cut Fleece is polyester reinforcement that comes in shapes for pipes and corners. We check the actual shape of each detail before choosing a form. If you are comparing Sika Sarnafil or another approach, we do not assume it uses the same detail. Each option lists its own products, so the facility manager can compare the real work, and a different material gets its own detail plan.
Pipes and corners
We inspect each pipe, curb or corner that will get liquid flashing. At a pipe, we check the roofing around it and anything attached to it. At a corner, we identify the surfaces the flashing has to join. Their condition decides the prep. Any repair to a pipe support or curb is kept separate from the flashing work, so the crew has a ready detail when they arrive.
Our skylight and penetration flashing work pairs the resin and fleece with any pipe or curb repairs needed. On any building, we confirm the exact details to be flashed and review the roof information available. The building contact confirms site rules. The pipe or corner form is chosen after inspecting the detail, with any curb or support repairs assigned first.
Prep and scheduling
We describe the prep each flashing needs: what gets removed and what stays. If the surface condition is uncertain, we recommend a closer look. We also note any curb or pipe work that has to finish first, with who is responsible and which step it affects. A vague prep allowance makes that hard to schedule.
A commercial roof repair scope lists the existing materials, the prep and any support work before the flashing goes on. If a different resin or reinforcement is substituted, we review its instructions too. Prep for one product is not assumed to work for another. The facility manager approves the final plan, and the crew works from the same plan with any open curb items flagged before they hold up the job.
Records of the finished work
We record the resin and reinforcement used at each location, with photos of any curb or pipe repairs before they were covered. We note the existing roofing around each finished detail and any changes in materials or prep. The record describes what was actually built, which is more useful than a note saying SOPREMA work was done.
For roofs in Downtown Chandler, those records give the next inspection a head start. If a pipe is moved later, the crew knows how it was flashed. A new repair can be checked against the surrounding roof, and the facility manager can find any specific corner. The detail references stay with the product records long after the job is done.
Commercial Roofing Questions
What should a SOPREMA proposal name?
The specific product and what it does at each detail, along with the existing roofing, the prep and how the flashing ties in.
What is ALSAN FLASHING used for?
SOPREMA describes it as a polyurethane bituminous resin for liquid flashing and detail work. We still check each detail and the product instructions before using it.
Why does liquid flashing need fleece?
The fleece reinforces the resin and is part of the flashing system. We note whether Polyfleece or ALSAN Pre-Cut Fleece is used and where.
Can you pick a pre-cut fleece form without seeing the detail?
No. We inspect each pipe or corner first, then plan the prep, any support repairs and the right reinforcement.
What records do we get when the work is done?
The resin and reinforcement used at each location, photos of curb or pipe repairs and notes on the surrounding roof and any changes.
Fix your problem details with SOPREMA
Send us your Chandler building and any product information you have. We will inspect the curbs, pipes and corners and recommend the SOPREMA flashing and prep each one needs.
Request a Roof AssessmentAll Roofing Manufacturers
